Brand New Original Bitmain APW12 12-15V Power Supply.
Compatible with most Antminer S19 series miner.
Ships within 24 hours of purchase from St. Louis, MO
PSU version selection guide
You can replace your stock antminer APW121215 PSU with another one that’s the same or higher version number. For example if your miner came with APW121215 version b PSU, you can replace it with versions b,c,d,e,f etc.
In most cases you can not replace your PSU with one that has a lower version number. For example if your miner came with version d PSU from the factory, you can not replace it with a version a, b or c PSU.
| APW12 | ||
| OUT1 | DC Voltage | 12V-15V |
| Rated Current(220 V input) | 233A | |
| Ripple & Noise | <1% | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
| OUT2 | DC Voltage | 12.3V |
| Rated Current(220 V input) | 15A | |
| Ripple & Noise | <1% | |
| Voltage Accuracy | 12.2V—12.4V | |
| Line Regulation | <1% | |
| Load Regulation | <1% | |
| Setup Time | <2S | |
| Short Circuit Protection | >10mS | |
| Input | Voltage Range | 200-240V AC |
| Frequency Range | 47-63Hz | |
| Power Factor | >0.99(full load) | |
| Leakage Current | <1.5mA（220V 50Hz） | |
| Protection | Low-voltage Input | 80-89V AC |
| Output Short Circuit | Yes | |
| Overheat Protection | Yes | |
| Over-current Output | 291A-350A （protection value varies under different voltage） |
|
| Environment | Operating Temperature | -20-45℃ |
| Operating Humidity | 20%-90%RH（non-condensing） | |
| Altitude | < 2000m | |
| Structure | Dimensions | 254.6mm*251.6mm*63mm |
| Net Weight | 3.6KG | |
| Cooling System | forced‐air cooling | |
| Noise | 45dBA | |
